by Joe
23. March 2010 07:17
Silde open the blower on the top of the machine and remove the two screws.
Remove the two screws in the front of the machine and the top cover will come off.
After the top cover has been removed, remove the two screws on the top near the cord winder, then remove the screw from the bottom side.
Once you remove the screws you can pull out the cordwinder.
After the cordwinder is pulled out, you can look directly at the motor. To service the motor you will need to remove four bolts, one on each corner of the motor.
You may also need to remove the four screws in the bag door if the control valve needs to be changed (this will need to be changed if you keep getting bag full)
Subscribe