Did you know your new Electrolux canister vacuum not only has a bag, but also a motor filter and a HEPA filter? If you are like many other customers, you may not realize the differences between the motor filter and the HEPA filter and how or when to replace them. No need to worry, however, because after today you’ll be a pro at keeping your vacuum running smoothly.
The Electrolux HEPA filter eliminates harmful particles down to .03 microns from your home (for comparison, the average human hair’s diameter is 100 microns). If you or anyone in your family suffers from allergies, this filter aids in the reduction of nasal irritation. Electrolux HEPA filters come in three variations: disposable (green), washable (blue), and anti-odor (grey).
To replace your Electrolux HEPA filter, begin by looking towards the back of the vacuum.
Located on the HEPA door are two button latches. Hold these down and gently let the door open.
Remove the current HEPA filter and replace it with a new one. Lift the door back into the closed position; it will click to lock.
Next, you can replace the bag and the motor filter simultaneously. The motor filter removes harmful particles from entering the motor helping keep it cool. If you do not change your motor filter or run the vacuum without one, it guarantees the motor burning out much faster.
First, remove the bag holder and bag from the interior of the canister (we’ll get to those in just a moment).
You’ll see a door latch housing the motor filter.
Open this door and remove the old motor filter and insert a new one.
Close the door and check that off your list.
Lastly, you address the bag. All new style Electrolux canister vacuums use the Style S Electrolux vacuum bags. Electrolux Style S vacuum bags come in several models: EL200 (paper), EL201 (synthetic long performance), EL202 (anti-allergy), EL203 (anti-odor, good for pet owners), EL211 (ultra long performance synthetic). For this demonstration, we’ll look at the EL201 synthetic long life Style S bag.
We’ve already removed the bag holder, so next remove the old bag by grabbing the cardboard tab and pulling it out.
Next, grab the new Style S bag to go into the vacuum.
On the cardboard tab, you will see two latch holes. These correspond directly with two latches on the bag holder. Slide the bag tab through the threading of the bag holder and make sure the latches go into the two openings on the tab.
Place the bag holder with the new bag back into the housing in the canister. Close the lid and you can resume cleaning your home knowing your motor and air are better for the replacements.
You should change the motor filter approximately every 3-6 months, depending on how often you vacuum and how heavy the jobs are. Your vacuum comes with a bag full light, so you just need to pay attention to that as to when to replace the Style S bag. The HEPA filter lasts an estimated 8-12 months, again depending on your cleaning frequency and how intensely your allergies act up. Changing out the filters ensures the longevity of your Electrolux canister vacuum and the health of your home.
If you have any questions, call in to speak with one of our representatives at (866)-972-8227.
Subscribe